aboot: loading compressed boot/vmlinux-2.6.17.8-gs320.novga.gz... aboot: zero-filling 4388784 bytes at 0xfffffc0001357b78 aboot: loading initrd (1143329 bytes/279 blocks) at 0xfffffc71ffdae000 aboot: starting kernel boot/vmlinux-2.6.17.8-gs320.novga.gz with arguments root=/dev/sda1 console=ttyS0 selinux=0 1 Linux version 2.6.17.8-gs320.novga (root@dolphin2) (gcc version 3.4.5 20051201 (Red Hat 3.4.5-2axp)) #1 SMP Sat Aug 12 21:24:54 EDT 2006 Booting on Wildfire using machine vector WILDFIRE from SRM Major Options: SMP EV67 VERBOSE_MCHECK DISCONTIGMEM DEBUG_SPINLOCK MAGIC_SYSRQ Command line: root=/dev/sda1 console=ttyS0 selinux=0 1 Raw memory layout: memcluster 0, usage 1, start 0, end 763 memcluster 1, usage 0, start 763, end 1048551 memcluster 2, usage 1, start 1048551, end 1048576 memcluster 3, usage 0, start 8388608, end 9437152 memcluster 4, usage 1, start 9437152, end 9437184 memcluster 5, usage 0, start 16777216, end 17825760 memcluster 6, usage 1, start 17825760, end 17825792 memcluster 7, usage 0, start 25165824, end 26214368 memcluster 8, usage 1, start 26214368, end 26214400 memcluster 9, usage 0, start 33554432, end 34602976 memcluster 10, usage 1, start 34602976, end 34603008 memcluster 11, usage 0, start 41943040, end 42991584 memcluster 12, usage 1, start 42991584, end 42991616 memcluster 13, usage 0, start 50331648, end 51380192 memcluster 14, usage 1, start 51380192, end 51380224 memcluster 15, usage 0, start 58720256, end 59768800 memcluster 16, usage 1, start 59768800, end 59768832 Initializing bootmem allocator on Node ID 0 memcluster 1, usage 0, start 763, end 1048551 Detected node memory: start 767, end 1048551 freeing pages 763:2048 freeing pages 3014:1048551 reserving pages 3014:3030 Initializing bootmem allocator on Node ID 1 memcluster 3, usage 0, start 8388608, end 9437152 Detected node memory: start 8388612, end 9437152 freeing pages 8388608:9437152 reserving pages 8388608:8388624 Initializing bootmem allocator on Node ID 2 memcluster 5, usage 0, start 16777216, end 17825760 Detected node memory: start 16777220, end 17825760 freeing pages 16777216:17825760 reserving pages 16777216:16777232 Initializing bootmem allocator on Node ID 3 memcluster 7, usage 0, start 25165824, end 26214368 Detected node memory: start 25165828, end 26214368 freeing pages 25165824:26214368 reserving pages 25165824:25165840 Initializing bootmem allocator on Node ID 4 memcluster 9, usage 0, start 33554432, end 34602976 Detected node memory: start 33554436, end 34602976 freeing pages 33554432:34602976 reserving pages 33554432:33554448 Initializing bootmem allocator on Node ID 5 memcluster 11, usage 0, start 41943040, end 42991584 Detected node memory: start 41943044, end 42991584 freeing pages 41943040:42991584 reserving pages 41943040:41943056 Initializing bootmem allocator on Node ID 6 memcluster 13, usage 0, start 50331648, end 51380192 Detected node memory: start 50331652, end 51380192 freeing pages 50331648:51380192 reserving pages 50331648:50331664 Initializing bootmem allocator on Node ID 7 memcluster 15, usage 0, start 58720256, end 59768800 Detected node memory: start 58720260, end 59768800 freeing pages 58720256:59768800 reserving pages 58720256:58720272 Initial ramdisk at: 0xfffffc71ffdae000 (1143329 bytes) 4096K Bcache detected; load hit latency 31 cycles, load miss latency 330 cycles Probed Hardware Configuration hard_qbb_mask: 0x ff soft_qbb_mask: 0x ff gp_mask: 0x ff hs_mask: 0x 1 iop_mask: 0x ff ior_mask: 0x 33 pca_mask: 0x 33 cpu_mask: 0x ffffffff mem_mask: 0x ffffffff hard_qbb_map: 0 1 2 3 4 5 6 7 soft_qbb_map: 0 1 2 3 4 5 6 7 SMP: 32 CPUs probed -- cpu_present_map = ffffffff Built 8 zonelists Kernel command line: root=/dev/sda1 console=ttyS0 selinux=0 1 PID hash table entries: 4096 (order: 12, 32768 bytes) Using epoch = 1952 Console: colour dummy device 80x25 Dentry cache hash table entries: 8388608 (order: 13, 67108864 bytes) Inode-cache hash table entries: 4194304 (order: 12, 33554432 bytes) Memory: 66460520k/67100768k available (2142k kernel code, 635000k reserved, 378k data, 192k init) Mount-cache hash table entries: 512 SMP starting up secondaries. Brought up 32 CPUs SMP: Total of 32 processors activated (47763.85 BogoMIPS). migration_cost=1953 checking if image is initramfs... it is Freeing initrd memory: 1116k freed NET: Registered protocol family 16 PCI: Bridge: 0000:00:02.0 IO window: 8000-8fff MEM window: 09000000-091fffff PREFETCH window: 09200000-092fffff PCI: Bridge: 0002:03:01.0 IO window: 8000-8fff MEM window: 09000000-091fffff PREFETCH window: 09200000-092fffff Linux Plug and Play Support v0.97 (c) Adam Belay SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub NET: Registered protocol family 2 IP route cache hash table entries: 1048576 (order: 10, 8388608 bytes) TCP established hash table entries: 262144 (order: 10, 8388608 bytes) TCP bind hash table entries: 65536 (order: 8, 2097152 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered audit: initializing netlink socket (disabled) audit(1155458118.781:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 8192 bytes) Coda Kernel/Venus communications, v6.0.0, coda@cs.cmu.edu Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered Activating ISA DMA hang workarounds. isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found rtc: Digital UNIX epoch (1952) detected Real Time Clock Driver v1.12ac Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize usbmon: debugfs is not available usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 atkbd.c: keyboard reset failed on isa0060/serio1 TCP bic registered atkbd.c: keyboard reset failed on isa0060/serio0 NET: Registered protocol family 1 NET: Registered protocol family 17 Freeing unused kernel memory: 192k freed irq 4: nobody cared (try booting with the "irqpoll" option) fffffc01fff3f7d8 0000000000000000 fffffc0001057718 0000000000000000 fffffc0001056b8c 0000000000000000 fffffc00012d8cc0 0000000000000004 fffffc00012d8ce8 fffffc01fd9696c0 fffffc01fff3f8c8 fffffc0001308b00 fffffc01fff3f8c8 fffffc01fd9696c0 fffffc0001056b60 0000000000000004 fffffc0001016294 fffffc01fff3f8c8 0000000000000004 000000000000000a 0000000000000000 fffffc0001748b00 0000000000000000 fffffc0001016310 Trace: [] note_interrupt+0x28c/0x2f8 [] __do_IRQ+0x130/0x1ac [] __do_IRQ+0x104/0x1ac [] handle_irq+0x88/0xac [] do_entInt+0x14/0x16c [] wildfire_device_interrupt+0x24/0x44 [] do_entInt+0x110/0x16c [] ret_from_sys_call+0x0/0x10 [] do_softirq+0x58/0x70 [] irq_exit+0x0/0x50 [] __do_softirq+0x78/0x154 [] do_softirq+0x58/0x70 [] handle_irq+0x98/0xac [] wildfire_device_interrupt+0x24/0x44 [] _spin_unlock+0x18/0x2c [] do_entInt+0x110/0x16c [] __do_IRQ+0x17c/0x1ac [] ret_from_sys_call+0x0/0x10 [] _spin_unlock_irqrestore+0x20/0x40 [] _raw_spin_unlock+0x0/0xb4 [] _spin_unlock_irqrestore+0x30/0x40 [] setup_irq+0x12c/0x1ec [] request_irq+0xc0/0x104 [] serial8250_interrupt+0x0/0x16c [] serial8250_startup+0x304/0x4c0 [] uart_startup+0xa0/0x208 [] uart_open+0x2ac/0x658 [] tty_open+0x260/0x3c8 [] _spin_lock+0x18/0x2c [] _spin_unlock+0x18/0x2c [] check_tty_count+0x6c/0xf8 [] tty_open+0x230/0x3c8 [] chrdev_open+0x1c4/0x218 [] __dentry_open+0x114/0x290 [] chrdev_open+0x0/0x218 [] nameidata_to_filp+0x38/0x64 [] do_filp_open+0x50/0x68 [] do_sys_open+0x7c/0x154 [] get_unused_fd+0x140/0x16c [] do_sys_open+0x60/0x154 [] init+0x3f4/0x4d0 [] kernel_thread+0x28/0x90 [] kernel_thread+0x10/0x90 handlers: [] (serial8250_interrupt+0x0/0x16c) Disabling IRQ #4 qla1280: QLA1040 found on PCI bus 0, dev 1 scsi(0:0): Resetting SCSI BUS scsi0 : QLogic QLA1040 PCI to SCSI Host Adapter Firmware version: 7.65.06, Driver version 3.26 qla1280: QLA1040 found on PCI bus 6, dev 2 scsi(1:0): Resetting SCSI BUS scsi1 : QLogic QLA1040 PCI to SCSI Host Adapter Firmware version: 7.65.06, Driver version 3.26 Vendor: COMPAQ Model: BD0366459B Rev: B008 Type: Direct-Access ANSI SCSI revision: 02 scsi(1:0:0:0): Sync: period 10, offset 12, Wide SCSI device sda: 71132000 512-byte hdwr sectors (36420 MB) sda: Write Protect is off SCSI device sda: drive cache: write through w/ FUA SCSI device sda: 71132000 512-byte hdwr sectors (36420 MB) sda: Write Protect is off SCSI device sda: drive cache: write through w/ FUA sda: sda1 sda2 sda3 sd 1:0:0:0: Attached scsi disk sda Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. irq 4: nobody cared (try booting with the "irqpoll" option) fffffc01fff3f888 0000000000000000 fffffc0001057718 0000000000000000 fffffc0001056b8c 0000000000000000 fffffc00012d8cc0 0000000000000004 fffffc00012d8ce8 fffffc01fd9696c0 fffffc01fff3f978 fffffc0001308b00 fffffc01fff3f978 fffffc01fd9696c0 fffffc0001056b60 0000000000000004 fffffc0001016294 fffffc01fff3f978 0000000000000004 000000000000000a 0000000000000000 fffffc0001748b00 0000000000000000 fffffc0001748b00 Trace: [] note_interrupt+0x28c/0x2f8 [] __do_IRQ+0x130/0x1ac [] __do_IRQ+0x104/0x1ac [] handle_irq+0x88/0xac [] wildfire_device_interrupt+0x24/0x44 [] do_entInt+0x110/0x16c [] ret_from_sys_call+0x0/0x10 [] do_softirq+0x58/0x70 [] irq_exit+0x0/0x50 [] __do_softirq+0x78/0x154 [] do_softirq+0x58/0x70 [] handle_irq+0x98/0xac [] wildfire_device_interrupt+0x24/0x44 [] do_entInt+0x110/0x16c [] ret_from_sys_call+0x0/0x10 [] _spin_unlock_irqrestore+0x20/0x40 [] _raw_spin_unlock+0x0/0xb4 [] _spin_unlock_irqrestore+0x30/0x40 [] setup_irq+0x12c/0x1ec [] request_irq+0xc0/0x104 [] serial8250_interrupt+0x0/0x16c [] serial8250_startup+0x304/0x4c0 [] uart_startup+0xa0/0x208 [] uart_open+0x2ac/0x658 [] tty_open+0x260/0x3c8 [] tty_open+0x1e0/0x3c8 [] _spin_lock+0x18/0x2c [] _spin_unlock+0x18/0x2c [] check_tty_count+0x6c/0xf8 [] tty_open+0x230/0x3c8 [] chrdev_open+0x1c4/0x218 [] __dentry_open+0x114/0x290 [] chrdev_open+0x0/0x218 [] nameidata_to_filp+0x38/0x64 [] do_filp_open+0x50/0x68 [] do_sys_open+0x7c/0x154 [] get_unused_fd+0x140/0x16c [] do_sys_open+0x60/0x154 [] entSys+0xa4/0xc0 handlers: [] (serial8250_interrupt+0x0/0x16c) Disabling IRQ #4 INIT: version 2.85 bootingirq 4: nobody cared (try booting with the "irqpoll" option) fffffc01fd34b888 0000000000000000 fffffc0001057718 0000000000000000 fffffc0001056b8c 0000000000000000 fffffc00012d8cc0 0000000000000004 fffffc00012d8ce8 fffffc0000ec1700 fffffc01fd34b978 fffffc0001308b00 fffffc01fd34b978 fffffc0000ec1700 fffffc0001056b60 0000000000000004 fffffc0001016294 fffffc01fd34b978 fffffc000135a700 000000000000000a 0000000000000000 fffffc0001748b00 0000000000000000 fffffc0001748b00 Trace: [] note_interrupt+0x28c/0x2f8 [] __do_IRQ+0x130/0x1ac [] __do_IRQ+0x104/0x1ac [] handle_irq+0x88/0xac [] wildfire_device_interrupt+0x24/0x44 [] do_entInt+0x110/0x16c [] ret_from_sys_call+0x0/0x10 [] rebalance_tick+0xa4/0x3d8 [] do_softirq+0x58/0x70 [] irq_exit+0x0/0x50 [] __do_softirq+0x78/0x154 [] do_softirq+0x58/0x70 [] smp_percpu_timer_interrupt+0x90/0xac [] do_entInt+0x6c/0x16c [] ret_from_sys_call+0x0/0x10 [] _spin_unlock_irqrestore+0x20/0x40 [] _raw_spin_unlock+0x0/0xb4 [] _spin_unlock_irqrestore+0x30/0x40 [] setup_irq+0x12c/0x1ec [] request_irq+0xc0/0x104 [] serial8250_interrupt+0x0/0x16c [] serial8250_startup+0x304/0x4c0 [] uart_startup+0xa0/0x208 [] uart_open+0x2ac/0x658 [] tty_open+0x260/0x3c8 [] tty_open+0x1e0/0x3c8 [] _spin_lock+0x18/0x2c [] _spin_unlock+0x18/0x2c [] check_tty_count+0x6c/0xf8 [] tty_open+0x230/0x3c8 [] chrdev_open+0x1c4/0x218 [] __dentry_open+0x114/0x290 [] chrdev_open+0x0/0x218 [] nameidata_to_filp+0x38/0x64 [] do_filp_open+0x50/0x68 [] do_sys_open+0x7c/0x154 [] get_unused_fd+0x140/0x16c [] do_sys_open+0x60/0x154 [] entSys+0xa4/0xc0 handlers: [] (serial8250_interrupt+0x0/0x16c) Disabling IRQ #4 Disabling IRQ #4 Entering runlevel: 1Disabling IRQ #4 Disabling IRQ #4 Entering non-interactive startup Telling Sending processes the KILL signalDisabling IRQ #4 sh-3.00# sh-3.00# sh-3.00# init 3 sh-3.00# INIT: Switching to runlevel: 3 INIT: Sending processes the TERM signal Disabling IRQ #4 Setting network parameters: [ OK ] Bringing up loopback interface: [ OK ] Bringing up interface eth0: [ OK ] Starting system logger: [ OK ] Starting kernel logger: [ OK ] Starting portmap: [ OK ] Starting NFS statd: [ OK ] Starting RPC idmapd: [ OK ] Mounting NFS filesystems: [ OK ] Mounting other filesystems: [ OK ] Starting automount: [ OK ] Starting smartd: [ OK ] Starting cups: irq 3: nobody cared (try booting with the "irqpoll" option) fffffc01f9e3f888 0000000000000000 fffffc0001057718 0000000000000000 fffffc0001056b8c 0000000000000000 fffffc00012d8c80 0000000000000003 fffffc00012d8ca8 fffffc01fd6b5b00 fffffc01f9e3f978 fffffc0001308b00 fffffc01f9e3f978 fffffc01fd6b5b00 fffffc0001056b60 0000000000000003 fffffc0001016294 fffffc01f9e3f978 0000000000000003 000000000000000a 0000000000000000 fffffc0001748b00 0000000000000000 fffffc0001748b00 Trace: [] note_interrupt+0x28c/0x2f8 [] __do_IRQ+0x130/0x1ac [] __do_IRQ+0x104/0x1ac [] handle_irq+0x88/0xac [] wildfire_device_interrupt+0x24/0x44 [] do_entInt+0x110/0x16c [] ret_from_sys_call+0x0/0x10 [] do_softirq+0x58/0x70 [] irq_exit+0x0/0x50 [] __do_softirq+0x78/0x154 [] do_softirq+0x58/0x70 [] handle_irq+0x98/0xac [] wildfire_device_interrupt+0x24/0x44 [] do_entInt+0x110/0x16c [] _spin_lock_irq+0x28/0x3c [] ret_from_sys_call+0x0/0x10 [] _spin_unlock_irqrestore+0x20/0x40 [] _raw_spin_unlock+0x0/0xb4 [] _spin_unlock_irqrestore+0x30/0x40 [] setup_irq+0x12c/0x1ec [] request_irq+0xc0/0x104 [] serial8250_interrupt+0x0/0x16c [] serial8250_startup+0x304/0x4c0 [] uart_startup+0xa0/0x208 [] uart_open+0x2ac/0x658 [] tty_open+0x260/0x3c8 [] _spin_lock+0x18/0x2c [] _spin_unlock+0x18/0x2c [] check_tty_count+0x6c/0xf8 [] tty_open+0x230/0x3c8 [] chrdev_open+0x1c4/0x218 [] __dentry_open+0x114/0x290 [] chrdev_open+0x0/0x218 [] nameidata_to_filp+0x38/0x64 [] do_filp_open+0x50/0x68 [] do_sys_open+0x7c/0x154 [] get_unused_fd+0x140/0x16c [] do_sys_open+0x60/0x154 [] entSys+0xa4/0xc0 handlers: [] (serial8250_interrupt+0x0/0x16c) Disabling IRQ #3 [ OK ] Starting sshd:module ipv6: Relocation overflow vs section 27 [ OK ] Starting rwho services: module ipv6: Relocation overflow vs section 27 [ OK ] Starting sendmail: module ipv6: Relocation overflow vs section 27 module ipv6: Relocation overflow vs section 27 [ OK ] Starting sm-client: module ipv6: Relocation overflow vs section 27 [ OK ] Starting crond: [ OK ] Starting anacron: [ OK ] Starting atd: [ OK ] irq 4: nobody cared (try booting with the "irqpoll" option) fffffc01fb1339f8 000000011f22bf35 fffffc0001057718 0000000000000000 fffffc0001056b8c 0000000000000000 fffffc00012d8cc0 0000000000000004 fffffc00012d8ce8 fffffc01fd6b5e40 fffffc01fb133ae8 0000000000000000 fffffc01fb133ae8 fffffc01fd6b5e40 fffffc0001056b60 0000000000000004 fffffc0001016294 fffffc01fb133ae8 0000000000000000 000000000000000a 0000000000000000 fffffc0001748b00 000000011f14f758 fffffc0001748b00 Trace: [] note_interrupt+0x28c/0x2f8 [] __do_IRQ+0x130/0x1ac [] __do_IRQ+0x104/0x1ac [] handle_irq+0x88/0xac [] wildfire_device_interrupt+0x24/0x44 [] do_entInt+0x110/0x16c [] ret_from_sys_call+0x0/0x10 [] uart_wait_until_sent+0x70/0x140 [] do_softirq+0x58/0x70 [] irq_exit+0x0/0x50 [] __do_softirq+0x78/0x154 [] do_softirq+0x58/0x70 [] handle_irq+0x98/0xac [] wildfire_device_interrupt+0x24/0x44 [] do_entInt+0x110/0x16c [] ret_from_sys_call+0x0/0x10 [] uart_wait_until_sent+0x70/0x140 [] serial8250_shutdown+0xdc/0x1c0 [] _raw_spin_unlock+0x0/0xb4 [] serial_out+0x0/0xdc [] uart_shutdown+0x108/0x170 [] uart_close+0x1d8/0x2d8 [] release_dev+0x238/0x81c [] tty_release+0x30/0x54 [] path_release+0x44/0x5c [] filp_close+0x98/0xd0 [] __fput+0xa0/0x220 [] lock_kernel+0x34/0x54 [] __fput+0xfc/0x220 [] filp_close+0xac/0xd0 [] sys_close+0xd4/0x108 [] entSys+0xa4/0xc0 handlers: [] (serial8250_interrupt+0x0/0x16c) Disabling IRQ #4 CentOS release 4.3 (Final) Kernel 2.6.17.8-gs320.novga on an alpha orca login: